Ihr Warenkorb x
Sie haben keine Artikel in Ihrem Einkaufswagen.
Wahoo RPM Speed-Halterung
7,99 €
Mehr Ansichten
Bewertungen
Produktübersicht
Die Wahoo RPM Speed-Halterung besteht aus einem Silikongehäuse, um Ihren Geschwindigkeitssensor an der Nabe des Vorderrads zu befestigen. Eine (1) Halterung wird mitgeliefert.
Wahoo RPM Speed Mount is rated
out of
5 by
3.
Rated 4 out of
5
by
Bikertgh from
RPM mount
Relatively easy too mount. 4 rides so far in cold temps, in the 30's, and worked flawlessly.
Date published: 2018-02-04
Rated 3 out of
5
by
RollerGu from
Limited application
This only fits on narrow hubs and I need a version for a fatter hub, like a Phil Wood track hub.
Date published: 2017-12-29
Rated 4 out of
5
by
Augsburg from
Works OK for small hubs
I was able to reach in between the spokes and stretch the rubber sufficiently to mount on a small diameter front hub. The rubber strap is pretty short, and therefore pretty tight to stretch around the hub. Too short to work on a larger rear hub or larger diameter dyno front hubs on our city bikes. The RPM speed sensor paired easily with our Polar V650 using Bluetooth. The sensor has stayed connected and works well. Much better choice than the SC sensor, that is knocked out of position too easily.
Date published: 2017-12-15
Produktübersicht
Die Wahoo RPM Speed-Halterung besteht aus einem Silikongehäuse, um Ihren Geschwindigkeitssensor an der Nabe des Vorderrads zu befestigen. Eine (1) Halterung wird mitgeliefert.
Funktionen
Spezifikationen
Bewertungen
ACHTUNG: Krebs und reproduktive Schäden - www.P65Warnings.ca.gov
