Your Cart ×
Sie haben keine Artikel in Ihrem Einkaufswagen.
Bewertungen
Produktübersicht
Unsere Out Front-Halterung für Wahoo ELEMNT GPS Fahrradcomputer ist aus leichtem und widerstandsfähigem Kunststoff gefertigt. Sie behalten stets die Anzeige und die Piste im Auge.
- Passt an runde Stangen mit 31,8 mm
- Gewicht: 20 g
- Geeignet für ELEMNT und ELEMNT BOLT (Hinweis: BOLT büßt bei Verwendung dieser Halterung an Aerodynamik ein).
Out Front Mount for ELEMNT Bike Computers is rated
out of
5 by
10.
Rated 1 out of
5
by
tryb from
Nice but...loses the computer too easily.
It is much too easy to lose your expensive device! The resistance to rotate the computer needs to be increased. The mount comes with a screw to permanently lock the device however this is not realistic or easy to use if you want to remove the computer for charging, or using on another bike.
The majority of friends who have these have lost their device. :(
Date published: 2017-10-17
Rated 4 out of
5
by
Makan33 from
can be better
i bought 2 additional front mounts for my other bikes. It would be great if it comes with some additional rubber shim that would help to clamp on some smaller size handlebars.
Date published: 2017-08-28
Rated 4 out of
5
by
saxman58 from
Secure, great location, but only fits 31.8mm bars
I got a 2nd mount to put on my other bike, an old touring bike with 25.4mm bars. This is designed for 31.8mm and doesn't come with an adapter, so I had to hunt around for some thick rubber pads to fill the gap. Otherwise a great way to mount the Elemnt.
Date published: 2017-08-22
Rated 5 out of
5
by
Mozz from
Sturdy mount
Pleased with this mount. It holds my Elemnt securely and there's no vibration. In my opinion having the Elemnt a few inches ahead of the bars gives a more comfortable view than a stem mount
Date published: 2017-08-04
Rated 5 out of
5
by
duckegg from
Best Elemnt Mount
On my drop-handlebar touring bike I replaced a handlebar/stem mount with this and it's a big improvement. It mounts securely and the Elemnt screen is easier to read, neither of which was true for the handlebar mount. Just make sure you adjust it so that the Elemnt isn't in contact with the road when you turn the bike upside down to mend a puncture.
Date published: 2017-07-30
Rated 5 out of
5
by
ZTBurton from
Solid mount, built well, quality product!
Bought this product for one of my bikes after picking up the Elemnt. I love it. It shipped quickly and is built with quality. It doesn't shake, rattle, or shift. Love it!
Date published: 2017-05-12
Rated 2 out of
5
by
BDKC from
Questionable design?
Unless I am missing something, there is one major problem with this mount if used as an out front mount, and that is that the hex screw that fastens the top and bottom of the mount together sits IN FRONT of the handlebar. This makes the mount too fat in front of the handlebar which is an issue for fitting the mount without the cables getting in the way. I finally got it fastened, but the ability to move the mount left and right along my handlebar, or to angle it downward, is hampered by cables. The hex screw needs to be in the back of the open round portion of the mount such that it will sit behind the handlebar. This is how most if not all other out front mounts work and how I believe the K-Edge works as well. Other than that, the mount works.
Date published: 2017-04-21
Rated 5 out of
5
by
adamo from
Quality
Very sturdy, even has some rubber pads built in to make the mount stay in place with a relatively lower amount of pressure. I prefer this over the k-edge.
Date published: 2017-04-05
Produktübersicht
Unsere Out Front-Halterung für Wahoo ELEMNT GPS Fahrradcomputer ist aus leichtem und widerstandsfähigem Kunststoff gefertigt. Sie behalten stets die Anzeige und die Piste im Auge.
- Passt an runde Stangen mit 31,8 mm
- Gewicht: 20 g
- Geeignet für ELEMNT und ELEMNT BOLT (Hinweis: BOLT büßt bei Verwendung dieser Halterung an Aerodynamik ein).
Funktionen
Weitere Informationen in FAQ - Häufig gestellte Fragen -
